NON-ELECTRIC IGNITION SYSTEMS
LPD IGNITION SYSTEMS
LPD non-electric detonators are specially produced for underground and tunnel blasting. Thanks to its wide delay ranges (100 ms-8500 ms), it ensures safe and ideal results in blasting applications.
The main function of the LPD detonator is to ignite the detonator sensitive explosive in the underground hole. It provides perfect shot control by giving the possibility of delay to blasting with full accuracy.
It provides superior performance with its (3L) 3-layer shock tube technology. In the non-electric ignition system, the energy travels through the shock tube and detonates the capsule.
It provides safe use without being affected by watery environments, underground conditions, radio waves and static electricity. Helps reduce air shock and ground shaking levels. They are used by attaching a T-connector that provides detonating fuse connection. The placed capsules can be ignited individually or by making a bundle bond, with a surface connection capsule, an electrical capsule and a minimum 5 gr/m detonating cord, without desensitizing the explosive in the column charge placed in the hole.
Shock tube winding will not be confused and easily dispersed in the tunnel, it is wrapped and fixed, providing fast and easy connection.
It is packed in cardboard boxes in desired quantities depending on the hole length.
It should be stored in warehouses in accordance with the provisions of the regulation numbered 87/12028.
It is assigned to Class 1.1B by the provisions of ADR and its UN number is 0360.
If desired, it can be assigned to Class 1.4S by packing according to the special provisions of ADR.
MS IGNITION SYSTEMS
It is a non-electric in-hole capsule specially designed for all kinds of open pit blasting.
At the surface, it is connected and ignited using a surface delay detonator (SD) or a detonating cord.
It provides superior performance with its (3L) 3-layer shock tube technology. In the non-electric ignition system, the energy travels through the shock tube and detonates the capsule.
It provides safe use without being affected by watery environments, radio waves and static electricity. Helps reduce air shock and ground shaking levels. If desired, they can be used by attaching a T-connector that provides detonating wick connection. With the surface connection detonator, electric detonator and a minimum 5 gr/m detonating cord, it can be ignited without desensitizing the explosive in the column charge placed in the hole.
The shock tube winding is wrapped and fixed in a way that does not interfere and provides fast and easy connection.
It is packed in cardboard boxes in desired quantities depending on the hole length.
It should be stored in warehouses in accordance with the provisions of the regulation numbered 87/12028.
It is assigned to Class 1.1B by the provisions of ADR and its UN number is 0360.
If desired, it can be assigned to Class 1.4S by packing according to the special provisions of ADR.
DUAL IGNITION SYSTEMS
It is a product formed as a result of the combined production of MS and SD capsules, which are specially designed for all kinds of open pit blasting. This combination allows one product to be stored instead of two, and easier inventory management. This product, which is extremely easy to apply, can be produced with different delay combinations according to the preferences of the users.
It provides superior performance with its (3L) 3-layer shock tube technology. In the non-electric ignition system, which offers unlimited delay, the energy travels through the shock tube and detonates the capsule.
It provides safe use without being affected by watery environments, radio waves and static electricity. Helps reduce air shock and ground shaking levels. Long-length Surface connection detonator can be ignited with electric detonator or special Nonel magnetos without desensitizing the explosive in the column charge placed in the hole.
The shock tube winding is wrapped and fixed in a way that does not interfere and provides fast and easy connection.
It is packed in cardboard boxes in desired quantities depending on the hole length.
It should be stored in warehouses in accordance with the provisions of the regulation numbered 87/12028.
It is assigned to Class 1.1B by the provisions of ADR and its UN number is 0360.
If desired, it can be assigned to Class 1.4S by packing according to the special provisions of ADR.
SD IGNITION SYSTEMS
It is a surface delay capsule specially designed for all kinds of open pit blasting.
This product is designed to transmit its delay to the in-hole capsules and to provide a delay between holes. In this way, an infinite number of holes can be delayed, and once more holes are exploded without causing environmental impact.
It is not used to detonate capsule sensitive explosives. A special connector is placed on the surface connection capsule heads and up to 6 choke tubes can be placed on these connectors.
SD Ignition systems have 7 types of delay, 9 – 17 – 25 – 42 – 67 – 100 and 200.
It provides superior performance with its (3L) 3-layer shock tube technology. In the non-electric ignition system, which offers unlimited delay, the energy travels through the shock tube and detonates the capsule.
The shock tube winding is wrapped and fixed in a way that does not interfere and provides fast and easy connection.
It is packed in cardboard boxes in desired quantities depending on the hole length.
It should be stored in warehouses in accordance with the provisions of the regulation numbered 87/12028.
It is assigned to Class 1.1B by the provisions of ADR and its UN number is 0360.
If desired, it can be assigned to Class 1.4S by packing according to the special provisions of ADR.
ELECTRIC IGNITION SYSTEMS
ALUMINUM SLEEVE CAPSULES
It is used for blasting dynamite or capsule sensitive products in underground and above-ground open pits. It is produced with and without delay. The outer shell material is aluminum. It is produced with 0.60 mm * 2 copper cable and is produced in 1.5 and 2.5 m lengths as standard. It can be produced in special sizes upon request.
It should be stored in warehouses in accordance with the provisions of the regulation numbered 87/12028.
It is assigned to Class 1.1B by the provisions of ADR and its UN number is 0030.
COPPER SLEEVE CAPSULES
It is used to blow up dynamite or capsule sensitive products in underground coal mines where there is a risk of fire. It is produced with and without delay. The outer shell material is aluminum. It is produced with 0.60 mm * 2 copper cable and is produced in 1.5 and 2.5 m lengths as standard. It can be produced in special sizes upon request. Delayed capsules can be used in stone galleries with a risk of grise.
It should be stored in warehouses in accordance with the provisions of the regulation numbered 87/12028.
It is assigned to Class 1.1B by the provisions of ADR and its UN number is 0030.
EXPLOSIVE wicks
It is the ignition system used in the firing of capsule sensitive explosives in surface and underground blasting operations, surface connections of non-electric detonators, and special blasting applications. It is easy to use, fast, practical and safe. PETN forms the inner part of the detonating wick. Around PETN, there is textile knitting. Explosive cord is covered with PVC on the outside. While this coating protects the wick, it enables PETN to perform its duty smoothly under external factors and weather conditions. Depending on the amount of PETN contained in the detonating cord, its usage areas change. These amounts vary as 5gr, 6gr, 10gr, 12gr, 20gr, 40gr and 80gr.
It should be stored in warehouses in accordance with the provisions of the regulation numbered 87/12028.
Assigned to Class 1.1D by the provisions of ADR and UN number 0065
SHOCK TUBE
It is a material produced as a 3-layer plastic tube with HMX and Aluminum powder placed at the micron level for triggering non-electrical capsules. It is used in the production of non-electric capsules.
It should be stored in warehouses in accordance with the provisions of the regulation numbered 87/12028.
Assigned to Class 1.4S by the provisions of ADR and UN number is 0349
NON-ELECTRIC CAPSULE HEAD
The non-electric detonator head is aluminum lagging detonators intended for use after being combined with the required length of choke tube along with a rubber sleeve. Basically, there are four types of Elemental capsules namely Type A, Type B, Type C and Type D. Type A and Type B are for use as a surface outline. Type C and Type D are used for in-hole applications.
Type A and Type B detonators consist of low energy millisecond delay detonators placed in a plastic junction block. It is designed to provide surface delay in non-electric blast pattern in Quarries, Surface coal mines, Open pit mines and Construction projects. They are used in conjunction with detonating cord sublines or other non-electrical delay systems to provide flexibility and ease of use in detonation design.
Type B, Type C, and Type D detonators provide a short delay and long delay non electric start system for use with detonating fuse trunks or other non-electrical delay systems to provide flexibility in explosion design and ease of use.
It should be stored in warehouses in accordance with the provisions of the regulation numbered 87/12028.
Assigned to Class 1.1B by the provisions of ADR and its UN number is 0029
NO. 8 DESTRUCTION CAPSULE
It is a capsule head consisting of an Aluminum metallic tube filled with high-power explosives such as ASA (primary charge) and PETN (secondary charge). Ignition is done with a safety fuse. When the primary charge activated by the fuse ignites the secondary charge, the Capsule Sensitive explosive or Detonating Cord in which the Common detonator is placed is ignited.
It should be stored in warehouses in accordance with the provisions of the regulation numbered 87/12028.
Assigned to Class 1.1B by the provisions of ADR and its UN number is 0029
SEISMIC CAPSULES
They are special capsules developed for seismic applications. It gives effective results with Seismic Dynamites. Seismic capsules are powerful capsules with high water resistance. It can be produced in various sizes. It is used in oil, natural gas, thermal water resources, drilling works, underwater blasting, seismic research, blasting operations in humid and watery environments.
It should be stored in warehouses in accordance with the provisions of the regulation numbered 87/12028.
It is assigned to Class 1.1B by the provisions of ADR and its UN number is 0030.